race motor and parts.

[garryb01r6]

i have an 01 r6 motor
that has been bored 2mm over , has je domed pistion,gytr intake cam, adj cam sprockets, side covers have been replace with thicker racing covers. tranny has been done by chuck graves more internal stuff but cant remember every thing. the motor has the head off due to me floting the intaqke valves .head comes with the motor, but you will need to get the head new valves and i would suggest geting stiffer springs. the bike runs on 114 trick fuel .and i belive that the com poression was around 14-1 the motor only has about 1200 miles so roughly almost two seasons but the motor has never been raced .700$ obo

i also have a stock radiator no fan 25$

arrow high mount race exhaust 750$ obo

carbs and airbox together. carbs have jetting for the arrow pipe and most/all emissions have been taken off the air box has a k&N filter and the induct hols have been widdend 160$

also have a frame with no sub frame . frame is strait 500$ obo


everthing is priced but is also negotible!
if you want everything it would be cheeper - 1700$ takes all

let me know garry 253 740 7462 located in kent wa

[thunderracing19]

Do you have any pics of the motor??

thunderracing191@hotmail.com

[garryb01r6]

i dont , and i really dont have any way to take anny.im lowering the price on it though due to my stupidity and impaciants. when i was taking the motor apart i didnt see a bolt in the under part of the oil pan and i broke a piece off dont know if its terminal or not , im going with not but anny ways i was selling it for 500 but really want to get rid of it before my curiosity gets me into more bad things so im selling it for 300$ plus the shiping if it needs to be shiped but i would rathe drive than ship. garry