EBalevi
07-12-2005, 10:38 PM
Hi everybody,
I didn't ride this bike for more than one year and a half, so it needs care. If you put some work on it, it would be a very good race bike though.
Here is the bike:
1999 YZFR6 + shop manual
Crankshaft and rods balanced and blueprinted MVR
Head cleaned and seated as per Supersport regulations MVR
Yamaha factory racing intake cam MVR
Yamaha Factory racing ignition box
Stage III custom carburetion work + Factory Pro velocity stacks + BMC racing air filter
Over Racing Japan full titanium 4-2-1 racing exhaust system
Perreault Performance Products “PPP” Racing rear sets
(height and forward/back adjustable foot pegs that double as protection in the event of crashes)
PPP rear suspension linkage dog bone (sets ride height for better turn in and traction out of corners)
PPP clip on handle bars for lower hand grip position & better race posture
Scotts rotary steering Damper
Intuitive frame savers (Polyurethane inserts that bolt onto existing motor mount bolts and swingarm pivot bolts)
Galfer -3 (3 mm) stainless steel braided racing brake lines Front and rear (running Motul synthetic racing brake fluid)
Galfer Carbon Fiber racing brake pads (with a new unused extra set)
Yamaha Factory racing fabric clutch discs
Barnett lightened racing metal clutch discs
Lochkhart Phillips heavy duty front brake cylinder and lever
Goodridge front brake line upper bleeder joint
Arai helmet Medium
And some race videos I got from the original owner.
Price: $3500
Thanks,
Erol Balevi
ebalevi@Hotmail.com
I didn't ride this bike for more than one year and a half, so it needs care. If you put some work on it, it would be a very good race bike though.
Here is the bike:
1999 YZFR6 + shop manual
Crankshaft and rods balanced and blueprinted MVR
Head cleaned and seated as per Supersport regulations MVR
Yamaha factory racing intake cam MVR
Yamaha Factory racing ignition box
Stage III custom carburetion work + Factory Pro velocity stacks + BMC racing air filter
Over Racing Japan full titanium 4-2-1 racing exhaust system
Perreault Performance Products “PPP” Racing rear sets
(height and forward/back adjustable foot pegs that double as protection in the event of crashes)
PPP rear suspension linkage dog bone (sets ride height for better turn in and traction out of corners)
PPP clip on handle bars for lower hand grip position & better race posture
Scotts rotary steering Damper
Intuitive frame savers (Polyurethane inserts that bolt onto existing motor mount bolts and swingarm pivot bolts)
Galfer -3 (3 mm) stainless steel braided racing brake lines Front and rear (running Motul synthetic racing brake fluid)
Galfer Carbon Fiber racing brake pads (with a new unused extra set)
Yamaha Factory racing fabric clutch discs
Barnett lightened racing metal clutch discs
Lochkhart Phillips heavy duty front brake cylinder and lever
Goodridge front brake line upper bleeder joint
Arai helmet Medium
And some race videos I got from the original owner.
Price: $3500
Thanks,
Erol Balevi
ebalevi@Hotmail.com