matt h
06-18-2010, 01:47 AM
fresh with a different track bike. All parts are in great condition and only lightly used. I can get closer up pics upon request. Basically everything is for sale on this bike, you name it, I probably have it.
Prices are fairly firm, but send me an offer, the worst I can do is just say no or counter offer!
Shipping is NOT included in the prices. Smaller items will go out in a flat rate box, price from $10-15 for shipping. Larger items will be handled differently.
OEM parts-
CLEAN title frame- has a small blemish up top, but its tough to see and is covered with plastics, other than that is in great condition.- $1500
Forks- straight and in great condition, was just adjusted by GP Suspension at the track 2 weeks ago.- $350
Rear shock- $50
Subframe- perfect condition- $120
Lower triple- $40
Upper triple w/ignition and keys, rear cowl locking mechanism included- $70
Wheel set- tires not included- $400. Rear sprocket included, front discs included. Will sell separately for $200/pc. Will leave the 003RS’s on for and additional $100. Lots of life left in them.
Front master cylinder- $70
Rear master cylinder- $50
Main wiring harness- $130
ECU- $45
Gauge cluster- $50
Fairing stay- $60
Front calipers- lots of life still left on the pads- $150
Rear caliper- lots of life still left on the pads- $100
Transmission including clutch/fly- perfect condition, no signs of any wear on the teeth, shifts very smoothly- $225
Tank- SOLD
Rear seat- SOLD
Front seat- SOLD
Rear tire hugger- $30
Throttle bodies w/airbox- $150
Throttle cable- just installed, only have about 500 miles on it- $20
Clutch cable- $20
Also have various sensors and engine bits and pieces, just ask and I probably have them. The only damaged parts on the engine is the head, and 1 rod/piston, the other 3 are good. The engine is completely apart so I can provide pics on specific parts upon request.
Aftermarket parts
PCV- basically brand new- SOLD
Autotune- SOLD
Will sell together for SOLD
Pazzo shorty levers, black lever w/gold adjuster- SOLD
Fren Tubo brake lines- SS w/aluminum fittings- SOLD
Woodcraft rearsets w/GP shift- $200
Vortex clip on’s- 50mm, black w/silver bars- $90
Optimal Racing bodywork- SOLD
Stock headers w/ttuner’s midpipe- $150
Graves CF slip-on- SOLD
BT003RS’s- about 500 street miles and 1 full beginner level trackday, LOTS of life still left in them, has a little cut on the sidewall, but its not deep at all, doesn’t affect integrity- $100
Like I said, the whole bike is being parted out. There are little pieces here and there that are not listed, just contact me of you have a specific part in mind. Ill add more as I find other parts to sell, but this is the basic list right now.
I will sell the whole rolling chassis with all the parts for $3500.
Pics- will add more tomorrow night, this is just to get the ball rolling
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7093.jpg?t=1276853396
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7108.jpg?t=1276853695
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7107.jpg?t=1276853695
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7136.jpg?t=1276853775
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7137.jpg?t=1276853799
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7138.jpg?t=1276853823
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7139.jpg?t=1276853848
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7140.jpg?t=1276853877
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7141.jpg?t=1276853877
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7142.jpg?t=1276853877
Contact info:
Post in this thread
Email- matthilaman@mac.com
Or PM
Paypal preferred
Again, shipping larger items will be charged more than the flat rate shipping prices, these will be dealt with separately. Local pick up is also available, im willing to travel up to 150 miles outside the Greater Seattle area for larger items.
lets get these parts gone! i need a new bike!
Prices are fairly firm, but send me an offer, the worst I can do is just say no or counter offer!
Shipping is NOT included in the prices. Smaller items will go out in a flat rate box, price from $10-15 for shipping. Larger items will be handled differently.
OEM parts-
CLEAN title frame- has a small blemish up top, but its tough to see and is covered with plastics, other than that is in great condition.- $1500
Forks- straight and in great condition, was just adjusted by GP Suspension at the track 2 weeks ago.- $350
Rear shock- $50
Subframe- perfect condition- $120
Lower triple- $40
Upper triple w/ignition and keys, rear cowl locking mechanism included- $70
Wheel set- tires not included- $400. Rear sprocket included, front discs included. Will sell separately for $200/pc. Will leave the 003RS’s on for and additional $100. Lots of life left in them.
Front master cylinder- $70
Rear master cylinder- $50
Main wiring harness- $130
ECU- $45
Gauge cluster- $50
Fairing stay- $60
Front calipers- lots of life still left on the pads- $150
Rear caliper- lots of life still left on the pads- $100
Transmission including clutch/fly- perfect condition, no signs of any wear on the teeth, shifts very smoothly- $225
Tank- SOLD
Rear seat- SOLD
Front seat- SOLD
Rear tire hugger- $30
Throttle bodies w/airbox- $150
Throttle cable- just installed, only have about 500 miles on it- $20
Clutch cable- $20
Also have various sensors and engine bits and pieces, just ask and I probably have them. The only damaged parts on the engine is the head, and 1 rod/piston, the other 3 are good. The engine is completely apart so I can provide pics on specific parts upon request.
Aftermarket parts
PCV- basically brand new- SOLD
Autotune- SOLD
Will sell together for SOLD
Pazzo shorty levers, black lever w/gold adjuster- SOLD
Fren Tubo brake lines- SS w/aluminum fittings- SOLD
Woodcraft rearsets w/GP shift- $200
Vortex clip on’s- 50mm, black w/silver bars- $90
Optimal Racing bodywork- SOLD
Stock headers w/ttuner’s midpipe- $150
Graves CF slip-on- SOLD
BT003RS’s- about 500 street miles and 1 full beginner level trackday, LOTS of life still left in them, has a little cut on the sidewall, but its not deep at all, doesn’t affect integrity- $100
Like I said, the whole bike is being parted out. There are little pieces here and there that are not listed, just contact me of you have a specific part in mind. Ill add more as I find other parts to sell, but this is the basic list right now.
I will sell the whole rolling chassis with all the parts for $3500.
Pics- will add more tomorrow night, this is just to get the ball rolling
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7093.jpg?t=1276853396
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7108.jpg?t=1276853695
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7107.jpg?t=1276853695
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7136.jpg?t=1276853775
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7137.jpg?t=1276853799
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7138.jpg?t=1276853823
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7139.jpg?t=1276853848
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7140.jpg?t=1276853877
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7141.jpg?t=1276853877
http://i67.photobucket.com/albums/h295/heftylefty/DSCN7142.jpg?t=1276853877
Contact info:
Post in this thread
Email- matthilaman@mac.com
Or PM
Paypal preferred
Again, shipping larger items will be charged more than the flat rate shipping prices, these will be dealt with separately. Local pick up is also available, im willing to travel up to 150 miles outside the Greater Seattle area for larger items.
lets get these parts gone! i need a new bike!